Installation
^Bolt the flange firmly to the ceiling us- ing the four M6 nuts.
^Shorten the power cord as much as possible and attach it to the terminal block inside the chimney (see "Elec- trical data").
Before connecting the appliance read the "Warning and Safety In- structions" and the "Electrical data" sections.
^Finally, being careful not to scratch the chimney, push the cover plate up and onto its locking pins until it clicks into place. If installed correctly, the cover should be secure and flush against the ceiling.
^Before using the appliance remove the grease filter and remove the pro- tective foil from the filter frame. Re- turn the filter.
29
