Cleaning and care
Before cleaning or servicing the hood, disconnect it from the power supply by either removing the fuse, unplugging it from the outlet or man- ually "tripping" the circuit breaker.
Cleaning the casing
,Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. They will damage the surface.
^The air intake panel, exterior surfaces and controls can be cleaned with warm water and liquid dish soap ap- plied with a soft sponge.
^Wipe dry using a soft cloth.
Only use a slightly damp sponge when cleaning the controls. Water could penetrate into the electronics and cause damage.
Glass surfaces can be cleaned using glass cleaner.
Stainless steel
Stainless steel surfaces can be cleaned using a
To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure.
Stainless steel colored controls
^These controls may become discol- ored or damaged if not cleaned regu- larly.
Do not use a stainless steel cleaner on these controls.
16
