![Electrical connection](/images/new-backgrounds/65672/6567227x1.webp)
Electrical connection
The electrical installation instructions for any appliance installed in combi- nation with the plate warmer must be observed.
When another appliance is installed in combination with the plate warmer to the same circuit breaker, operat- ing both appliances at the same time could cause an overload. If in doubt consult a qualified electrician. All electrical work should be done by a qualified technician, in strict ac- cordance with national and local safety regulations.
Installation, repairs and other work by unqualified persons could be dangerous and may void the war- ranty.
Make sure power is not supplied to the appliance while installation or re- pair work is being performed.
WARNING:
THIS APPLIANCE MUST BE GROUNDED
Note to the installer
Please leave these instructions with the consumer.
Power supply
This appliance is equipped with an approx. 6 ft (approx. 1.8 m) long power cord with plug ready for connection to a 120 V, 15 A, 60 Hz power supply.
14