Installing the appliance
^Loosen the bracket that holds the appliance to the pallet.
,Caution! The appliance is no longer secured and may be unstable.
^From the rear of the appliance carefully lift it from the pallet.
Once the appliance is on the ground it can be wheeled around.
RemoteVision module installation
(optional accessory)
Always disconnect the appliance from the power supply when performing installation, maintenance or service work.
Install the RemoteVision module before placing the appliance in its installation niche.
Once connected the RemoteVision module will increase the energy consumption of the appliance.
The slot for the RemoteVision module is located in the lower area of the back of your appliance.
^Unscrew the screws a on the cover b and pull off the sticker c.
^ Remove the cover b. |
^Push the module into the slot until it locks into place.
^Connect the appliance to the power supply and turn it on. After several seconds the indicator light will come on.
The indicator light will display different colors one after the other; any control light at the end indicates that the module was correctly installed.
53
