Miele F1811SF, F1801SF, F1911SF, F1901SF Aligning the appliance, Installing the appliance

Installing the appliance

Aligning the appliance

^Align the appliance with the surrounding cabinets.

The height-adjustable feet at the front and rear can all be adjusted from the front.

–Front: with an open-ended wrench ½" (SW 13).

The feet can be adjusted from the top and bottom e.

–Rear: with a 5/16" (8 mm) hex nut driver via flexible shaft f.

A mark is located on the appliance base and is used as a standard gauge for height adjustment. When adjusting the height, align this mark at 1 1/4"

(32 mm) above the floor.

^Unscrew the height-adjustable feet until the mark on the base has

reached the indicated guide dimension 1 1/4" (32 mm).

^Check that the appliance is level with the surrounding cabinets.

58