Warning and Safety instructions

Technical safety

Before setting up the appliance, check it for any externally visible

damage.

Do not install and use a damaged appliance.

This appliance contains the coolant Isobutane (R600a), a natural gas

which is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this environmentally friendly coolant has, however, led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the coolant flowing around the system. This is unavoidable, but does not have any adverse effect on the performance of the appliance.

Care must be taken during the transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can damage the eyes.

In the event of any damage:

-avoid open fires and anything which creates a spark,

-disconnect from the mains,

-air the room in which the appliance is located for several minutes and

-contact the Service Department for advice.

The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small

room, there is the danger of combustible gases building up.

For every 8 g of coolant at least 1 m3 of room space is required. The amount of coolant in the appliance is stated on the data plate inside the appliance.

Before connecting the appliance to the mains supply, make sure that

the rating on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt.

The electrical safety of this appliance can only be guaranteed

when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and tested regularly, and where there is any doubt, the household wiring system should be inspected by a qualified electrician.

The manufacturer cannot be held liable for damage or injury caused by the lack of or inadequacy of an effective earthing system (e.g. electric shock).

If the connection cable is faulty it must only be replaced by a Miele approved service technician to protect

the user from danger.

7

Page 6 Page 8
Page 7
Image 7
Miele F 9212 I installation instructions Technical safety
Page 6 Page 8

F 9212 I specifications

The Miele F 9212 I is a premium built-in freezer that combines innovative technology and advanced features to provide effective food preservation and convenience for modern kitchens. Miele has built a reputation for manufacturing high-quality appliances, and the F 9212 I exemplifies this commitment with its functional design and attention to detail.

One of the standout features of the Miele F 9212 I is its generous storage capacity. With ample space for storing a variety of frozen goods, this freezer offers adjustable shelving and storage drawers that make organization easy. The interior is designed with a bright LED light, ensuring that users can easily locate items even in lower lighting conditions.

The F 9212 I employs various technologies to enhance its performance. One of these technologies is Miele’s NoFrost system, which eliminates the need for manual defrosting. This innovative feature prevents ice buildup within the freezer, maintaining optimal airflow and enhancing energy efficiency. The result is a hassle-free experience for users, who can enjoy long-term food preservation without the tedious task of defrosting.

Energy efficiency is another key characteristic of the Miele F 9212 I. Rated with an A++ energy efficiency classification, this model ensures that users can save on electricity bills while minimizing their environmental footprint. Additionally, Miele has included an Eco mode that automatically optimizes energy consumption, further enhancing its sustainability.

The appliance is also equipped with a User-friendly TouchControl interface that allows for easy temperature adjustment and monitoring. Users can customize the freezer’s settings to suit their needs, ensuring that food is stored at the ideal temperature for preservation. Moreover, the F 9212 I comes with a built-in alarm system that alerts users if the door is left open or if the temperature rises unexpectedly, offering peace of mind and protecting food quality.

Another remarkable aspect of the F 9212 I is its sleek and minimalistic design. With a customizable door panel, it seamlessly integrates into kitchen cabinetry, contributing to an overall cohesive look. Its durable materials and construction ensure that the appliance not only performs excellently but also stands the test of time in any home environment.

In conclusion, the Miele F 9212 I built-in freezer is a blend of functionality, style, and advanced technology. Its spacious design, energy efficiency, and user-friendly features make it a valuable addition to any modern kitchen, providing reliable food storage solutions while maintaining Miele's commitment to quality.
Top Page Image Contents