JVC GY-HD250 Alarm Message Display, Menu Setting Screen, Safety Zone Indication Camera mode only

e_hd250.book Page 30 Tuesday, October 24, 2006 3:11 PM

CONTROLS, INDICATORS AND CONNECTORS

Indications on the LCD Monitor and in the Viewfinder (Cont’d)

Auto White Balance Indication (Camera mode only)

The AUTO WHITE indication and the result of the operation are dis- played during the auto white balance adjustment operation.

X See “White Balance Adjustment” on page 52.

Alarm Message Display

•The following alarm messages are displayed while the STA- TUS (0, 1, 4) screen is shown in the Camera mode, or a STA- TUS screen is shown in the VTR mode.

If an alarm is generated while the STATUS 2, 3 screen is shown, the STATUS 0 screen returns to display the alarm. X See page 106.

•When an abnormality occurs in the VTR, a warning message with an error code is displayed.

X See pages 106-108.

Alarm display area

Menu Setting Screen

Screen used for making various settings.

The Menu Setting Screen appears when the STATUS button is pressed for 1 second or more.

X See “Setting Menu Screens” on page 75.

TOP MENU screen (Camera mode)

Safety Zone Indication (Camera mode only)

The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and CEN- TER MARK item on the LCD/VF[1/4] menu screen. X See page 89.

In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO FORMAT menu screen, as shown below.

SAFETY ZONE

OFF

4:3

14:9

16:9

16:9+4:3

CENTER MARK

-

OFF

ON

OFF

ON

OFF

ON

OFF

ON

REC

ASPECT

DV-60I

DV-50I

4:3

Cannot be selected

DV-24P

DV-24PA

DV-25P

16:9

HDV-HD60P

HDV-HD50P

HDV-HD30P

[16:9]

HDV-HD25P

HDV-HD24P

30