JVC GY-HD251 manual Battery Operation, „GY-HD250U, Attaching the Battery, Removing the Battery

e_hd250.book Page 37 Tuesday, October 24, 2006 3:11 PM

Battery Operation

The attachable battery varies depending on location. Recommended batteries

U model: Dionic 90 (Anton Bauer)

E model: Endura-7 (IDX)

CAUTION

Use only the recommended batteries.

If a heavy battery is used, the battery may fall out depend- ing on the way the HD camera recorder is used.

„GY-HD250U

Use an Anton Bauer battery.

Attaching the Battery

1.Align the battery guide pins (three places) with the bat- tery adapter guide holes and insert straight. Battery will not be properly attached if guide pins are not straight.

Cassette cover	Guide	Guide pins
side panel	holes (×3)
Release lever

Battery pack (trim pack)

LCD screen side panel

2.Slide the battery towards the Cassette cover side panel until it clicks.

• The battery is attached.

Removing the Battery

Slide the battery towards you (LCD screen side panel) while holding down the release lever, and pull away from the device to remove the battery.

Release lever

Battery

„GY-HD251E

Use an IDX (Endura) battery.

Attaching the Battery

1.Face the battery terminals down and align the battery V- mount with the battery adapter V-mount attachment.

V-mountV-mountattachment

2.Slide the battery down until it clicks and locks.

• The battery is attached.

Removing the Battery

Slide the battery up while holding down the lock release but- ton to remove the battery.

Release button

Battery

37