JVC GY-HD250 FILE MANAGE Menu Screen Cont’d, Resetting the menu settings to the factory settings

e_hd250.book Page 102 Tuesday, October 24, 2006 3:11 PM

MENU SCREENS

FILE MANAGE Menu Screen (Cont’d)

Resetting the menu settings to the factory settings

Select the RESET FILE.. item on the FILE MANAGE menu screen.

1.Turn the SHUTTER dial, bring the cursor (K) to SELECT and press the SHUTTER dial.

•The file name setting area for the file to be reset flashes.

2.Turn the SHUTTER dial, select the name of the file to reset, and press the SHUTTER dial.

CAM1, CAM2, CAM3, CAM4, CURRENT (current set- tings)

3.Turn the SHUTTER dial, bring the cursor (K) to the RESET item and press the SHUTTER dial.

•EXECUTE flashes.

4.With EXECUTE selected, press the SHUTTER dial to reset the settings.

MEMO

Even if CAM1, CAM2, CAM3, or CAM4 are reset, the cur- rent settings are not reset.

To reset the currently set values, select “CURRENT”.

Initializing (formatting) an SD mem- ory card

Before initializing (formatting) a card:

1Insert and remove the SD memory card with the power to this device OFF.

2Disable write-protection on the SD memory card.

3Check that an SD memory card has been inserted into this device.

1.Turn the SHUTTER dial, bring the cursor (K) to the FOR- MAT SD CARD item and press the SHUTTER dial.

• CANCEL flashes.

2.Turn the SHUTTER dial, and when EXECUTE flashes, press the SHUTTER dial to initialize (format) the card.

Execute	Complete
	Flashing
	Error display
Error

If there is an error:

Check items 2 and 3 in “Before initializing (formatting) a card”.

Execute Complete

If the current menu settings and the factory settings have different video format settings, “REBOOT!” is displayed for 3 seconds, this device turns off automatically and then turns on.

Reboot display

When this happens, the SUB NAME initial value, “[SCENE]” is displayed.

102