TROUBLESHOOTING
Problem:
Message = iPod Disconnected
Solution:
•Check that the iPod Connection Cable is connected between the Electronics Enclosure and the iPod.
Problem:
Message = AUX is Disabled
Solution:
•Check AUX Input (see page 10).
•Check the connection between the Electronics Enclosure and the auxiliary device.
Problem:
Hearing static when playing the iPod with wireless FM transmission.
Solution:
•Interference from an FM station at the same frequency. Try another FM frequency (see page 9).
•Consider installing the optional Wired FM Adaptor (see page 5).
Problem:
Drive + Play won’t turn on.
Solution:
•Replace the
Problem:
Message = Please update your iPod software
Solution:
•Download and install the latest software version for your iPod (see Apple.com).
TECHNICAL SPECIFICATIONS
Dimensions of Electronics Enclosure:
6" (152.0mm) x
Maximum Mounting Diameter of Text Display:
Maximum Mounting Diameter of Control Knob:
Fuse Rating: 2A
Nominal Current Requirement with iPod Connected: 500mA
Line Output Voltage: 1V
Maximum Auxiliary Input Voltage: 1V
Audio Input and Output Jacks: 3.5mm stereo
All features and specifications are subject to change without notice.
Harman Kardon and Harman International are registered trademarks, and Drive + Play is a trademark, of Harman International Industries, Incorporated.
Apple and iPod are registered trademarks of Apple Computer, Inc.
Information for the User
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Technical Support
If you are having other problems with Drive + Play, please contact us at:
1 – (516) – 255 – HKHK (4545)
Or on the Web at:
www.harmankardon.com
250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com
©2005 Harman International Industries, Incorporated. All rights reserved. Part No.
12 TROUBLESHOOTING
