JVC GY-HD250 manual Indications on the LCD Monitor and in the View- finder, Status Screens, Memo

e_hd250.book Page 22 Tuesday, October 24, 2006 3:11 PM

CONTROLS, INDICATORS AND CONNECTORS

Indications on the LCD Monitor and in the View- finder

In addition to showing the EE image and the playback pic- ture, the LCD monitor and viewfinder are also used for the following character displays.

To show characters on the LCD monitor, press the DISPLAY button briefly.

The contents of the status display are divided into those for the Camera mode and those for the VTR mode.

•Each time the STATUS button is pressed in the Camera mode, one of 5 status screens is displayed. (STATUS 0, 1, 2, 3, 4)

•One type of screen is displayed in the VTR mode.

•CAMERA MODE (display example)

DISPLAY button

„Status screens (screens for checking the current cam- era settings)

„Auto white display (only displayed in the Camera mode)

„Menu setting screens

„Alarm message display

„Safety zone display (only displayed in the Camera mode)

MEMO

When ANALOG OUT CHAR. on the OTHERS[1/2] menu screen is ON, characters are also shown on images from the Y/PB/PR OUT and VIDEO OUT terminals.

Characters are also shown on images from the HD/SD-SDI OUT terminal when the SDI OUT CHAR. is ON.

Status Screens

Press the STATUS button while normal screen is displayed to show one of the status screens.

USER 1 USER 2 USER 3

SHUTTER

ND FILTER

2

1

MENU

STATUS 0 STATUS 1

	STATUS 2
STATUS 4

• VTR MODE (display example)

STATUS 3 STATUS

MEMO

•When the STATUS button is pressed for 1 second or longer, the menu setting screen is displayed.

To display the Status screen while the menu setting screen is displayed, press the STATUS button to return to the normal screen.

•You can switch between the LCD monitor and the view- finder by holding down the DISPLAY button for about 2 seconds. (When the LCD+VF item on the LCD/VF[4/4] menu screen is set to OFF.)

STATUS

STATUS button

22