JVC GY-HD250, GY-HD251 manual OTHERS1/2 Menu Screen, Menu Screens, Memo

e_hd250.book Page 96 Tuesday, October 24, 2006 3:11 PM

MENU SCREENS

OTHERS[1/2] Menu Screen

The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen)

Item			Function/Setting (bold characters indicate initial settings)
ANALOG OUT CHAR.	Sets whether or not to display characters such as status and menus on the screen for the [Y/PB/PR] and [VIDEO
		OUT] terminals.
		ON	: On-screen display.
		OFF	: No on-screen display.
		MEMO
		When ANALOG OUT CHAR. item is set to ON, the content displayed on the viewfinder is also displayed in the
		video from the video output terminal. During VTR recording, the mode is displayed in red on the viewfinder. How-
		ever, color is not applied for the following video outputs.
		• Component output of recording or playback in DV format
		• Composite output
SDI OUT CHAR.		Sets whether or not to display characters such as status and menus on the screen for the [HD/SD SDI] terminal.
		ON	: On-screen display.
		OFF	: No on-screen display.
LONG PAUSE TIME	Selects the time (minutes) before the tape protect mode (drum head rotation stopped) is engaged when the record-
		standby condition continues.
		3MIN	: 3 minutes
		5MIN	: 5 minutes
		* When used in a cold environment or when the stopped or STILL status continues, the setting will be 3 minutes or
		less regardless of the setting on the menu.
		* Normally, set “3MIN” and use this to prevent head clogging and tape damage.
ALARM VR LEVEL	Selects whether or not alarm sound is emitted and the volume of the alarm sound.
		The alarm sound is output through the monitoring loudspeaker and the PHONES jack.
		OFF	: Sound is not output.
		LOW	: Alarm sound is soft.
		MIDDLE	: Alarm sound is normal.
		HIGH	: Alarm sound is loud.
FRONT TALLY		Selects the lighting method of the FRONT TALLY lamp during recording.
		BLINK	: The lamp blinks from when the REC/VTR trigger is pressed and until recording starts. The lamp lights
			steadily during recording.
		ON	: The lamp lights only during recording.
		OFF	: The lamp is always off.
BACK TALLY	Selects the lighting method of the BACK TALLY lamp during recording.
		BLINK	: The lamp blinks from when the REC/VTR trigger is pressed and until recording starts. The lamp lights
			steadily during recording.
		ON	: The lamp lights only during recording.
		OFF	: The lamp is always off.
FORMAT LED	Sets whether or not the [HDV/DV LED] g on page 15 lights for HDV format or DV format.
		ON	: Lights.
		OFF	: Does not light.
GENLOCK..	Calls up the GENLOCK menu screen.
		Adjusts the H PHASE or SC PHASE of image signals of this device according to the external synchronization signal
		input to the [GENLOCK IN] terminal.
		X See page 99.
NEXT PAGE	To display the OTHERS[2/2] menu screen, move the cursor to this position and press the SHUTTER dial.
PAGE BACK	The TOP MENU screen returns when the SHUTTER dial is pressed while the cursor is at this position.

96