Step 1: Foot Assembly
Thread a Foot (K) into each 3” Pillar (E).
Thread a Shelf Connector (A) into the other end of the 3” Pillar (E) until tight. Repeat this process for each remaining 3” Pillar.
Diagram 1
A
E
K
Step 2: Add Bottom Shelf
Insert each Foot Assembly from Step 1 through the Bottom Shelf (I) as shown in Diagram 2.
Diagram 2
I
Foot
Assembly
Step 3: Add 9” Pillars
Thread a 9” Pillar (G) onto each exposed Shelf Connector (A) until tight.
Thread a Shelf Connector (A) into the top of the four 9” Pillars (G) as shown in Diagram 3.
Diagram 3
A
G
I
A