Aquacal T135, T65, T115 TropiCal Table of Specifications, Refrigerant Circuit Performance Charts

TropiCal: Table of Specifications

￿

MODELS:			T65”X”-A	T65”X”-B	T115 “X”-A	T115 “X”-B	T135 “X”-A	T135 “X”-B
BTU - 80%RH
Air ºF / Air ºF…	80/50	55000/37000		55000/37000	104,000/70,000	104,000/70,000	126,000/82000	126,000/82000
COP		4.8/3.7		4.8/3.7	4.3/3.2	4.3/3.2	5.7/4.0	5.7/4.0
BTU - 63% RH
Air ºF / Air ºF…	80/50	51000/34000		51000/34000	97,000/65,000	97,000/65,000	119000/77000	119000/77000
COP		4.5/3.6		4.5/3.6	4/3.1	4/3.1	5.4/3.8	5.4/3.8
Kilowatt Input (80% RH)		3.4		3.4	7.1	7.1	6.5	6.5
Voltage/Hz/Phase		208-230/60/1		208-230/60/3	208-230/60/1	208-230/60/3	208-230/60/1	208-230/60/3
Min. Circuit Ampacity		20.01		14.04	40.56	26.14	37.36	30.14
Recommended Fuse Size		20		15.00	40	30	40	35
Max. Fuse or Breaker Size		30		20.00	70	40	60	50
Min-Max Water Flow (gpm)		20-70		20-70	20-70	20-70	20-70	20-70
Shipping weight (lbs)		250		250	270	270	300	300
Shipping Size (l x w x h)			36" X 30" X 35"	36" X 30" X 35"	36" X 30" X 35"	36" X 30" X 35"	36"X30"X42	36"X30"X42
Uncrated Weight (lbs)		223		223	243	243	273	273

￿

￿

Refrigerant Circuit Performance Charts

Use of Charts- Information for the Technician:

The charts are intended for use by trained and qualified air-conditioning and refrigeration technicians only. The charts are compiled specifically for evaluation and diagnostic purposes, and are NOT designed for use as charging charts. To apply the chart data to actual conditions: gather the operating pressures, suction tube superheat & liquid line subcooling values, water temperature change through the heater, and the total unit amps. Locate a chart that most closely represents current actual conditions. Readings obtained that differ from the charts in excess of 10% (+ or -), may indicate a problem within the mechanical refrigeration system. Reference: Troubleshooting Refrigerant Circuit Problems, following the charts. Some interpolation between charts will be necessary should actual conditions not align reasonably well with the charts. Should refrigerant circuit readings appear normal, but not the Water DT value, the likely cause will be water flow above or below 45 GPM. (TropiCal refrigerant circuits will perform acceptably with condenser water flow between 20 to 70 GPM.)

Performance Charts Follow

11