JVC GY-HD250, GY-HD251 manual Header REC Menu Screen, Disable

e_hd250.book Page 94 Tuesday, October 24, 2006 3:11 PM

MENU SCREENS

HEADER REC Menu

Screen

The HEADER REC menu screen is used for settings related to the HEADER REC function. X See page 60.

Item			Function/Setting (bold characters indicate initial settings)
START KEY	Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while
		the STOP button is pressed.
		DISABLE	: HEADER REC operation is not executed.
		STOP+REC	: HEADER REC operation is executed.
TC DATA	Sets the time code value for the point when the Record-Standby mode is engaged following completion of HEADER
		REC.
		EXECUTE	: Confirms the set time code.
		ZERO PRESET	: Resets all time codes to “0”.
		CANCEL	: Clears the set time code.
		The frame mode is set depending on the setting in the DROP FRAME item on the TC/UB/CLOCK menu screen.
		* The time code value at the point when the Record-Standby mode is engaged may differ some frames from the val-
		ue set for this item.
UB DATA		Sets the user’s bits of the HEADER REC section.
		EXECUTE	: Confirms the set user’s bits.
		ZERO PRESET	: Resets all user’s bits data to “0”.
		CANCEL	: Clears the set user’s bits.
		MEMO
		• The user’s bits for the normal recording section are set on the TC/UB/CLOCK menu screen.
		• When the “UB REC” item is set to “OFF”, “--------” is displayed and this cannot be selected.
BARS TIME	Sets the duration (seconds) in which the color bar signal and test tone (1 kHz) is recorded during HEADER REC. (1-
		sec steps)
		[Settings: 0SEC - 30SEC - 99SEC]
BLACK TIME	Sets the duration (seconds) in which the black signal is recorded during HEADER REC. (1-sec steps)
		[Settings: 0SEC - 30SEC - 99SEC]
PAGE BACK	The TC/UB/CLOCK menu screen returns when the SHUTTER dial is pressed.

94