Minicom Advanced Systems 5UM20114 Video Settings, Changing the order, Enable local video port

Models: 5UM20114

1 87
Download 87 pages 1.29 Kb
Page 29
Image 29

OPERATING GUIDE.

Each selection adds the outlet to the list at the bottom. The order of powering off/on, will be the order as set out in this list.

Changing the order

To change the order the outlets are powered on/off:

Highlight the desired outlet and move it using the arrows.

26.Video Settings

From the Smart 16 IP Menu choose Video Settings. The Video settings appear. See Figure 19.

Figure 19 Video Settings

Enable local video port

This option decides if the video output on the local monitor connected to Smart 16 IP is active and passing through the incoming signal from the host system.

Use this option to switch off the local monitor connected to Smart 16 IP when accessing sensitive information on the Host computer.

Noise filter

Define how Smart 16 IP reacts to small changes in the video input signal. A large tolerance needs less network traffic and leads to a faster video display, but small changes in some display regions may not be recognized immediately. A small tolerance displays all changes instantly but may lead to a constant amount of network traffic even if display content is not really changing (depending on the quality of the video input signal). The default setting should be suitable for most situations.

28

Page 29
Image 29
Minicom Advanced Systems 5UM20114 manual Video Settings, Changing the order, Enable local video port, Noise filter