Hand Held Products 7900 manual UPhone Configuration, Accessing uPhone Configuration, Tab Windows

uPhone Configuration

uPhone Settings enable you to establish the normal operating parameters for uPhone applications.

Requirements

To open the uPhone configuration tools, the GSM radio must be enabled and an active SIM must be installed. The configuration tools access the network directly. If you are not connected, settings cannot be configured and you will receive an error notification when you attempt to open the configuration tools.

Accessing uPhone Configuration

You can access uPhone Settings two ways:

1. Tap Start > Settings > System tab > uPhone icon .

2. In the Dialler application, selecting Tools > Configuration.

An animated wait icon displays the following message while the system accesses the network.

If there is no response from the network within 60 seconds, this message times-out and the control panel closes. If the network responds, the uPhone Settings screen displays; the General tab appears first by default.

Tab Windows

uPhone Configuration consists of five tabs: General, Network, Divert, Bar, and Messaging. Tapping OK accepts any changes and exits the uPhone Configuration.

11 - 14 Rev D Dolphin® 7900 Series User’s Guide