Hand Held Products 7900 Side Panel Features, Opening the Access Door, Programmable Side Button

Side Panel Features

The following graphic shows the left, side panel:

Programmable Side Button Access Door

Programmable Side Button

Programmable buttons are located on both side panels. By default, these buttons activate the image/scan engine as a more ergonomic alternative to pressing the SCAN key on the keyboard. These buttons can be programmed to perform specific functions in the Buttons setting. For details, see Buttons on page 7-3.

Access Door

When the access door is open, the mini-SD memory interface and SIM card slot are available. The following graphic displays both slots as they appear when the Dolphin terminal is placed flat with the keyboard facing down.

Mini-SD Interface

SIM Card Slot

Mini-SD Interface You can install a mini-SD card to expand the capacity of the terminal’s storage memory. 256 MB cards are currently available from Hand Held Products. (The mini- SD memory interface does not support SDIO.)

SIM Card SIM cards are used with a GSM/GPRS radio.

Opening the Access Door

Note: Access door removal requires a special tool from Hand Held Products, part number 100001024.

1.Press Blue + Backlight key to put the terminal in suspend mode; see Suspend Mode on page 2-9.

2.Remove the battery; see page 2-5.

3.Place the terminal on a flat, secure surface with the keyboard face-down.

3 - 6 Rev D Dolphin® 7900 Series User’s Guide