Hand Held Products 7900 manual Supplying Power to the ChargeBase, Dock LED, Charge LEDs

Dock LED

Each terminal well displays a Dock LED on the front that lights solid green when a terminal is properly seated, which means that the terminal and the base are connected.

Charge LEDs

Each terminal well displays a Charge LED on the front that lights green to indicate charging. For details, see Charging Terminals in the ChargeBase on page 15-3.

Back Panel

Power Supply Connector

Power Supply Connector

This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this connector. There is no ON/OFF switch on the back panel of the ChargeBase. The ON/OFF switch is on the power adapter.

Power Supply

The Dolphin ChargeBase includes a power supply that contains a power adapter to ensure the proper voltage. The power adapter plugs into standard AC/DC outlets.

Power Adapter

Power

Connector

Cable

ON/OFF

Switch

Power Cord ON Position

Supplying Power to the ChargeBase

!	You must use the power adapter provided by Hand Held Products with the Dolphin ChargeBase. Using a non-Hand Held Products
	power adapter voids your warranty and could result in serious damage to the circuitry of the Dolphin ChargeBase.

1. Be sure the power switch on the power adapter is in the OFF position.

15 - 2 Rev D Dolphin® 7900 Series User’s Guide