Philips 42HFL3381/97 Preset the picture format, Preset the power mode, Use Smart power, Set ID

Preset the picture format

1	Enter the PBS setup menu.
2	Press	to select [Switch On

Settings] > [Picture Format].

3 Press to select one of the available picture formats.

4 Press to return to the previous screen.

Preset the power mode

1 Enter the PBS setup menu.

2 Press to select [Switch On Settings] > [Power On]. Select the power mode that is used when the TV is switched on from the mains:

• [Standby] (Standby): The TV is switched on in standby mode.

• [On] (On): The TV is switched on.

• [Last Status] (Last status): The TV is switched on to the last used power mode.

3 Press to return to the previous screen.

Use Smart power

Smart power enables you to display picture
with significant power savings without
compromising the picture quality.
1	Enter the PBS setup menu.
2	Press	to select [Switch On
	Settings] > [Smart Power]. Select one of
	the following options:
	• [Off] (Off): Disables Smart Power.
	• [Low] (Low): Displays the picture
	with least power savings.
	• [Medium] (Medium): Displays the
	picture with medium power savings.
	• [High] (High): Displays the picture
3	with maximum power savings.
	Press	to return to the previous screen.

Display a welcome message

1 Enter the PBS setup menu.

2 Press to select [Switch On Settings] > [Display Msg]. Select one of the following options:

• [Off] (Off): Disables the display of a welcome message.

• [On] (On): Enables the display of a welcome message for a pre-defined period of time (see ‘Set a welcome message’ on page 8).

3 Press to return to the previous screen.

Set a welcome message

1 Enter the PBS setup menu.

2 Press to select [Switch On Settings] > [Welcome Msg]. Select one of the following to set or clear a welcome message:

• [Line 1] (Line 1): Press to enter the first line of the welcome message.

• [Line 2] (Line 2): Press to enter the second line of the welcome message.

• [Clear] (Clear): Clears the welcome message.

• [Msg Timeout] (Message timeout): Set the display time to 20, 25 or 30 seconds.

3 Press to return to the previous screen.

Tip

••You can have a maximum of 20 alphanumeric characters in each line of your welcome message.

Set ID

1	Enter the PBS setup menu.
2	Press	to select [Switch On Settings] >

[Set ID].

3 Press to adjust the ID to a number between 0 - 63.

4 Press to return to the previous screen.

Note

••Available only in public signage applications.

8EN