Hand Held Products 7900 manual System Tab

System Tab

The System Settings tab controls logging and the port manger timeout period.

Field	Description
Log Level	These settings control the detail of the log messages generated by the Client. Each level is cumula-
	tive. By default, all errors, warnings, and information events are logged. Each entry records a severity
	code (of one [debug message] to four [error] asterisks), a time stamp, and a message.
	• Errors - only the most severe conditions are logged.
	• Warnings - less severe conditions are logged.
	• Information - all errors, warnings, and information events are logged. This is the default setting.
	• Debugging - creates a log message each time the Client detects or reacts to an event. Be advised
	that log entries fill memory quickly if the Debugging level is chosen. Do not use the Debugging
	option for a significant length of time because most internal operations generate messages.
Defaults	Tap this button to return log settings to the default settings.
Disable Wireless	Use this option only as directed by technical support.
Zero Config	Selecting this option disables other wireless utilities whether the Client is running or not. If not
	selected, other wireless utilities cannot apply their settings to the wireless card while the Client is run-
	ning (although their status displays are usually unaffected). You will need to perform a soft reset
	whenever this setting is changed.
Port Manager	The interval at which the client polls the ports. This is used under different circumstances, for instance
Timeout	after physical changes such as card removal or insertion have been detected. This value should not
	be changed from the 10-second default unless so advised by technical support.

9 - 22 Rev D Dolphin® 7900 Series User’s Guide