Hand Held Products 7900 manual Server Tab, Port Settings Area

Server Tab

The Server identity tab defines the credentials the client uses to authenticate the server during TLS/TTLS/PEAP authentication message exchange. The Client uses this information to verify that the Client is communicating with a trusted server.

Field	Description
Do not validate server	If this option is selected, the server certificate received during the TLS/TTLS/PEAP message
certificate chain	exchange is not validated.
Certificate issuer	This is the certificate authority used during TLS/TTLS/PEAP message exchange. Any Trusted
must be	CA is the default selection and means that any certificate authority can be used during authen-
	tication.
	Both trusted intermediate certificate authorities and root authorities whose certificates exist in
	the system store are available for selection in the drop-down list.
Allow intermediate	This option is selected by default and enables unspecified certificates to be in the server certifi-
certificates	cate chain between the server certificate and the certificate authority selected in the Certificate
	issuer must be field.
	When selected, this option allows the server certificate received during negotiation to be issued
	directly by the certificate authority or by one of its intermediate certificate authorities.
	If disabled, then the selected Certificate issuer must have directly issued the server certificate.
Server name must be	This is either the server name or the domain the server belongs to, depending on which option
	is selected below the text field.
	During authentication, this name will be compared to the server certificate’s Subject: CN field.
Must match exactly	When selected, the server name entered must match the server name found on the certificate
	exactly.
Must contain domain	When selected, the server name field identifies a domain and the certificate must have a server
name	name belonging to this domain or to one of its sub-domains (e.g., zeelans.com, where the
	server is blueberry.zeelans.com).

Port Settings Area

In the Port Settings area, you configure network parameters for each port listed on the main screen.

1.On the main screen, tap and hold on a port. The Port popup menu appears.

2.Tap Configure. The Port Settings Configuration screen opens displaying the Wireless Networks tab.

Dolphin® 7900 Series User’s Guide Rev D 9 - 23