Hand Held Products 7900 manual About Tab, Using the Status Icon

Field	Description
Defaults	Resets all the settings to default values
	• Always Enable for Power Save Mode,
	• Automatic based on WEP setting for Authentication Algorithm, and
	• Auto TX Preamble (for Preamble Mode).
Apply	Applies changes. This button is active only when a change has been made on the tab.

About Tab

The About tab displays Version Number and time of build for Network Driver, Configuration Utility, and NIC Firmware.

Using the Status Icon

You access the 801.11b Settings by tapping the Status icon once on the Today screen . The following menu pops up:

Menu Option	Selecting This Option…
Wireless Radio On	Turns on the radio. LED is on and the Link Icon displays with signal strength.
Wireless Radio Off	Turns off the radio. A pop-up window will ask for your confirmation. If confirmed, the LED
	will be off and the Status icon will change color from green to red on the top without signal
	strength displayed. The WLAN card/module will stop functioning.
	Removes the Status Icon from the bottom tray. A pop-
	up window asks you to confirm. Click Yes to confirm, or
	No to cancel.
	If confirmed, the Status icon does not display in the
	task tray, and you will need to go to Start > Programs
Remove Status Icon	> 802.11b Settings in the future.
Wireless Network Status	Opens the Status tab; Status Tab, page 9-3.
Configuration	Opens the Config tab; Config Tab, page 9-4.
Advanced Configuration	Opens the Advanced tab; Advanced Tab, page 9-8.
Version Information	Opens the About tab; About Tab, page 9-9.

Note: The Status Icon changes to a crossed lock as a warning that you may have entered a wrong key (WEP Key mismatch) for the WEP-On AP or a station.

Dolphin® 7900 Series User’s Guide Rev D 9 - 9