Hand Held Products 7900 manual WEP Mgmt Tab

WEP Mgmt Tab

The WEP Mgmt tab enables you to set WEP parameters for each port.

Field	Description
Provide encryption	This option is selected by default. If this option is selected, the other WEP settings on this page
key dynamically	are disabled. To enter a custom WEP, de-select this option. The other fields become active.
Use key for data	Select this option to manually enter a WEP key to encrypt your data to the AP. You enter that key
encryption	in the Key field below.
Use key to	Select this option if your network does not support 802.1x authentication and you need to con-
authenticate with AP	nect to the AP without username and password authentication. The key entered below is used to
	authenticate instead.
Key	In this field, enter the WEP key:
		ASCII - 5 or 13 characters
		Hexadecimal - 10 or 26 characters.
		When the key entered is in the correct format, the screen
		changes to display the type - ASCII or Hexadecimal.
Key Index/Transmit	The Key Index drop-down list contains the available keys. You may enter up to four keys for
Key	reception; the Client will try all four to find one that works with the AP.
	From the drop-down list, select the key to be used for transmission as well. If the key selected is
	the transmit key, the Transmit key box is checked.
	To change the transmit key, select another key and check the Transmit key box. The check box
	of the original transmit key will be automatically de-selected.

Dolphin® 7900 Series User’s Guide Rev D 9 - 27