KTI Networks KS-801 manual Duplex Mode Setting, Specifications

Duplex Mode Setting

The duplex mode used for the fiber module is configured by software port control settings. See chapter 5 for more information.

Specifications

Standard	IEEE 802.3u 100BASE-FX
Speed	100Mbps
Duplex mode	Full duplex or half duplex
Wavelength	1300nm
Fiber Connectors	ST, SC, MT-RJ, VF-45
Fiber cable	MM 50/125mm, 62.5/125mm recommended
	SM 9/125mm recommended

Module Installation

1.Turn off the power to the switch unit.

2.Open the cover of Fiber slot.

3.Set Fiber jumper J1.

4.Insert the module into slot until it is seated properly.

5. Screw the module onto the chassis securely.

-19-