Manuals / KTI Networks / Computer Equipment / Switch

KTI Networks KS-801 manual SNMP Management, Upgrade Firmware

Models: KS-801

1 29

Download 29 pages 42.06 Kb

Page 28

5.7 SNMP Management

SNMP management are performed at a network management station run- ning SNMP network management application manager software with graphical user interface.

The switch serves as an SNMP agent and provides the capabilities that allows network administrators to set parameters and view statistical counters defined in the standard MIB-II and private MIB.

The supported MIBs are available in the supplied CD-ROM of the switch. Use the SNMP management application software to compile the MIB file first before performing any management operation.

5.8 Upgrade Firmware

The switch supports Software Upgrade feature via two methods :

1.Via TFTP protocol. TFTP file transfer functions allow you to perform software upgrade over network.

2.Via Console port. One file transfer utility program SFTP.EXE is provided to perform software upgrade via RS232 console port.

TFTPUpdateFirmware

If you select TFTP Update Firmware command from web management screen, specify the following information for software upgrade opera- tion:

IP address : IP address of the TFTP server from where the software upgrade will be obtained.

File name : file name of the new software version

After you finish the upgrade operation, reboot the switch using the supported command within the console or telnet.

Note: The TFTP protocol is used to download updated software to the

-28-

Image 28

KTI Networks KS-801 manual SNMP Management, Upgrade Firmware

Contents

10/100 Fast Ethernet Managed Switch with Fiber Connectivity Installation GuideKS-801 DOC.001002-KS801-KKTI Networks Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of KTI Networks Inc. to provide notification of such revision or change INSTALLATION GUIDE 9-Port Fast Ethernet Managed Switch with Fiber ConnectivityDOC.001002-KS801-NK P/N CISPR A COMPLIANCE TRADEMARKSCE NOTICE 2. Installing the Switch 4. LED Indicators1. Introduction 3. Making Network Connections1. Introduction 1.1 Features Management Features Telnet for remote control IEEE 802.1d Spanning Tree protocol TFTP - software upgrade capabilityProvides one RS232 local console port Web-based management SNMP management SNMP agent RFC1.2 Specifications IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX FX10BASE-T Cat. 3, 4, 5 UTP cable 100 meters max 100BASE-TX Cat. 5 UTP cable 100 meters max2. Installing the Switch 2.1 Packing List2.2 Panels LED display for power and all port status2.3 Mounting the Switches 3.1 Network Switched Ports 3. Making Network ConnectionsConnector type Port #PIN# MDI-X Jacks MDI JackCrossover SW Port #9 RJ-453.2 10/100BASE-TX Fast Ethernet Ports Flow Control 3.3 Fast Ethernet Fiber Slot Fiber Jumper Setting Fiber Module Top view Fiber Jumper SettingModule Outline Duplex Mode Setting 3.4 Making Trunk Connections The switch supports the following trunk configurationsConfiguration TrunkRules 3.5 Making Sniffer 4.1 LED Panels 4. LED Indicators4.2 Interpretation 5. Performing Network Management 5.1 Management Support5.2 Management objects Login Port StatusAdministrator Port Statistics5.3 Setting IP Address 5.4 Console Management5.5 Web Management 5.6 Telnet Managementhttp//xxx.xxx.xxx.xxx telnet5.8 Upgrade Firmware 5.7 SNMP Management5.9 Support