3.2 10/100BASE-TX Fast Ethernet Ports
The switch can support connections to the following devices:
•10BASE-T or 10/100BASE-TX network cards
•10BASE-T hub ports
•100BASE-TX hub ports
•10/100BASE-TX dual speed hub ports
•10/100BASE-TX switch ports
Auto-negotiation Capable
The ports support auto-negotiation function when establishing a link connection with any auto-negotiation capable device. The connection speed and duplex mode are determined through the negotiation process with the connected device.
Auto-speed-sensing
When connecting to a non-auto-negotiation device, half duplex mode is used. However, the ports can auto-detect the connection speed.
Manual Configuration
The ports are configured to be enabled for auto-negotiation as factory default. However, it also can be changed and stick to one of the follow- ing configurations through network management operation:
_10M Half-duplex
_10M Full-duplex
_100M Half-duplex
_100M Full-duplex
Trunking Function
The ports are configured as normal data ports instead of trunking ports as factory default. In order to support trunking function, any port can be configured as a trunking port manually through network management operation. As configured, it is no longer a data port. For more details about trunking, refer to section 3.4.
