The following figure illustrates an example of
Rules :
1.One switch can be configured to have up to 2 trunks and each trunk is composed of 2 trunking ports.
2.One trunking port can only belong to one trunk.
3.Only one trunk can exist between two switch units.
4.Crossover UTP cables should be used at the same time for one trunk connection. The length of each cable can be up to 100 meters.
5.When the switched data ports are enabled as trunking ports, they can only serve trunking function, but no other data function.
6.Since the trunking is proprietary, the switches do not support trunk connection to other brand’s switches.
