Hand Held Products 7900 Using the Dialler, Making a Call, Entering a Phone Number, Sending a Call

Using the Dialler

The Dialler is the is the program that manages your GSM/GPRS cell phone calls.

To launch the Dialler, tap Start > Programs > uPhone > Dialler. The program launches and the uPhone Dialler screen opens:

Dialler screen

Signal Strength -

Four bars is optimal.

Tap to send a call or accept an incoming call

Tap to clear the Dialler screen

Tap * and # buttons for interactive voice systems;

i.e., touchtones.

Three information lines:

Network–name of service provider. Number/Name–dialed, incoming, and

outgoing calls. Status–status of the phone.

Tap to end a call

Phone keypad - tap the numbers to dial

Making a Call

Entering a Phone Number

You can:

•Enter the numbers manually using the phone keypad on the Dialler screen, the SIP, or the Dolphin keyboard.

•As you enter each number, the digits appears on the Dialler screen in the Name/Number line. If a contact matching the entered number is found in the Phonebook, the name of the contact appears in the Name/Number line as you type; tapping on the name enters the rest of the number automatically.

•Use the Phonebook to

•Select an existing contact.

Tap Tools > Phonebook, select a name or number in the list, and tap OK (you can also tap and hold on the entry). The number is automatically entered in the Dialler and appears on the screen.

•Use speed dial.

Tap and hold on the list to see a popup menu of speed dial numbers.

•Use the Call Log

•When the phone is in Idle status, you can tap the Send button on the screen , press the ENTER key, or tap Tools > Call Log to see a list of the last 20 calls made or received. Tap and hold on an entry in the list and select Dial. Pressing the Send button or ENTER key performs this function only when the phone is in an Idle Status.

Sending a Call

You can:

Dolphin® 7900 Series User’s Guide Rev D 11 - 5