Hand Held Products 7900 manual To Remove Programs, Screen

Remove Programs

The Remove Programs settings enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the device is out of memory. The programs removed are removed from RAM memory. Any program (usually *.cab or *.dll files) stored in the Autoinstall folder (My Device > IPSM > Autoinstall) will re-install after the next hard reset.

For information about the Autoinstall process, see Let Autoinstall Run on page -7.

For information about the hard reset process, see Hard Reset (Cold Boot) on page -9.

To Remove Programs

1. Tap Remove Programs. In the list, select the program you want to remove.

2. Tap Remove. The following message appears:

3.Tap Yes. Wait while the program is removed.

4.Verify that the program no longer appears in the list.

Memory

The Remove Programs screen displays the total storage memory available. It adjusts automatically when a program is removed for quick reference. For more detailed memory information, tap memory of “Adjust memory allocation” along the bottom margin. It opens the Memory system setting. For information about memory settings, see Memory on page 7-8.

Screen

Note: By default, dynamic screen rotation (i.e., the ability to switch between landscape and portrait orientation) is disabled on Dolphin 7900 terminals.

The Screen system setting contains three tabs: Alignment, Clear Type, and Text Size.

7 - 12 Rev D Dolphin® 7900 Series User’s Guide