SMART CAT5 SWITCH 16 IP.
gateway address and net mask. Before you connect Smart 16 IP to your local sub- net, complete the corresponding configuration of your DHCP server.
BOOTP - When selected, Smart 16 IP will contact a BOOTP (Bootstrap Protocol) server in the local
IP address
Static IP address in the usual dot notation.
Subnet mask
The net mask of the local network.
Gateway IP address
In case the Smart 16 IP should be accessible from networks other than the local one, this IP address must be set to the local network router's IP address.
Primary DNS Server IP address
IP address of the primary Domain Name Server. This may be left empty, however Smart 16 IP won't be able to perform name resolution.
Secondary DNS Server IP address
This address will be used in case the Primary DNS Server can't be contacted.
Primary Time Server
IP address of the primary NTP (Network Time Protocol) compliant timeserver. Smart 16 IP will synchronize its own absolute time with the timeserver's one. This is important for writing log entries and for the Dynamic DNS Service.
Secondary Time Server
This address will be used in case the Primary Time Server can't be contacted.
Remote Console & HTTPS port
Port number at which Smart 16 IP's Remote Console server and HTTPS server are listening. If empty the default value is used.
HTTP port
Port number at which Smart 16 IP's HTTP server is listening. If empty the default value is used.
35
