JVC GY-HD251, GY-HD250 manual Switching between the LCD Screen and Viewfinder Display, Memo

e_hd250.book Page 31 Tuesday, October 24, 2006 3:11 PM

SAFETY ZONE			2.35:1CE			2.35:1CH
CENTER MARK		OFF		ON	OFF		ON
DV-60I	4:3	Cannot be selected
DV-50I
DV-24P
DV-24PA	16:9
DV-25P
HDV-HD60P
HDV-HD50P
HDV-HD30P	[16:9]
HDV-HD25P
HDV-HD24P

Switching between the LCD Screen and Viewfinder Display

„When the LCD+VF item in the LCD/VF[4/4] menu is set to OFF, the LCD monitor and viewfinder (VF) displays are as shown below.

LCD Monitor Status		LCD Display	VF Display
LCD Closed	Normal LCD	OFF	ON
	Inverted LCD	ON	OFF
LCD Open	Normal LCD	ON	OFF
	Inverted LCD	ON	OFF

MEMO

•You can switch between the LCD monitor and the view- finder by holding down the DISPLAY button for about 2 seconds.

•After you set up the function that switches the display between the LCD monitor and the viewfinder by holding down the DISPLAY button, the display mode is cancelled by the LCD monitor open/close and normal/inverted operations.

•If the LCD monitor is closed inside this device with the screen in the normal display orientation, holding down the DISPLAY button does not work.

„When the LCD+VF item in the LCD/VF[4/4] menu is set to ON, the LCD monitor and viewfinder (VF) displays are as shown below.

LCD Monitor Status		LCD Display	VF Display
LCD Closed	Normal LCD	OFF	ON
	Inverted LCD	ON	ON
LCD Open	Normal LCD	ON	ON
	Inverted LCD	ON	ON

MEMO

•Press the DISPLAY button for 2 seconds to switch the LCD screen display ON and OFF.

•The viewfinder screen is always displayed.

DISPLAY button

Normal LCD

Inverted LCD

LCD open 40° or more

LCD close less than 40°

31