e_hd250.book Page 35 Tuesday, October 24, 2006 3:11 PM
Attaching the Tripod Base (Provided only for U model)
Use the provided tripod base to place the camera on a tri- pod. (U model only)
1.Attach the tripod base on the tripod by using the hole that balances this device most optimally.
CAUTION
•The front base mount may be locked while the pin of the tripod base is not inserted into the hole on the rear base mount of this device. Therefore, after mounting, make sure that these parts are engaged properly.
•When moving this device mounted on a tripod, any impact or vibration should be avoided as this may cause this device to become detached and to drop from the tri- pod.
Be sure to remove this device from the tripod before transporting it.
1.Tripod mounting holes
2.While pushing the safety lever, pull the lock lever toward the front until the front mount clip clicks into place.
Front mount clip
3. Pin
2. Safety lever 
2.
Lock lever
3.Place this device on the tripod base by aligning the rear base mount of this device with the pin on the tripod base.
4. Front base mount
3. Rear base mount
4.Hold the camera on the top and slide forward so that the base mount of the camera is locked by the front mount clip of this device as it clicks into place.
4.
MACRO
VF BRIGHT
USER 1 | USER 2 | USER 3 |
ND FILTER
2
1
MENU
STATUS
WHT.BAL
AUTO AUTO
AUDIO
ON OFF
POWER REC
35
