JVC GY-HD250 manual Left Side Section, 4INPUT1/INPUT2 INPUT1/INPUT2 audio input connec- tors, Memo

e_hd250.book Page 16 Tuesday, October 24, 2006 3:11 PM

CONTROLS, INDICATORS AND CONNECTORS

Left Side Section

4[INPUT1/INPUT2] INPUT1/INPUT2 audio input connec- tors

These are audio input connectors for connecting to an external audio device or microphone.

9 8 7

IEEE 1394 C H 2 - A U D I O O U T - C H 1 V I D E O

0 6 5

1

2

3

4

•Set the [AUDIO INPUT] switch 3 according to the device to be connected.

•Set the CH-2 audio input connector using the [CH-2 INPUT] switch 2.

The CH-2 audio from the set connector is recorded.

5Shoulder pad slide button

Button to adjust the position of the shoulder pad.

When you press this button, you can move the position of the shoulder pad 6 forward or backward.

6Shoulder pad

7Cassette cover

Sliding the EJECT switch a on page 18 located on the top section opens this cover to allow insertion or removal of the videocassette.

CAUTION

1Viewfinder connector (6-pin)

Connect the cable from the viewfinder here.

•Set the image format for this terminal in VF SIGNAL on the LCD/VF[4/4] menu screen. X See page 92.

2[CH-2 INPUT] CH-2 audio input connector selector switch

Selects the CH-2 audio input connector.

INPUT1	: Inputs the audio from the INPUT1 connector
	4 into CH-2.
INPUT2	: Inputs the audio from the INPUT2 connector
	4 into CH-2.

MEMO

The audio from the INPUT1 connector is also input into CH-1 regardless of the setting.

3[AUDIO INPUT] Audio input signal selector switch This switch is used to select the input sound signal from INPUT1 or INPUT2 connector.

LINE	: Set to this position when connected to audio
	equipment, etc. The reference input level is
	+4 dBs.
MIC	: Set to this position when the dynamic micro-
	phone is connected.

MIC+48V : Set to this position when a microphone requiring +48 V power supply (phantom microphone, etc.) is connected.

CAUTION

When connecting a component that does not require +48 V power supply, make sure that the switch is not set to MIC+48V before the component is connected.

MEMO

You can select the normal input level for MIC and MIC+48V in the INPUT1, 2 MIC REF. item on the AUDIO/MIC[1/2] menu screen.

X See page 87.

To prevent foreign objects from entering the internal parts of the VTR unit, do not leave this device with the cover open for extended periods of time.

8[VIDEO OUT] Video output terminal (RCA)

This is a terminal for composite video signal output.

•Select whether or not to output a signal with setup in SET UP on the VIDEO FORMAT[2/2] menu screen. (Only for U model)

9[AUDIO OUTPUT CH-1/CH-2] Audio output connector (RCA)

Output connector for audio signals.

•Outputs the input audio signal in the Camera mode.

•Outputs the playback audio signal in the VTR mode.

•When a HDV/DV signal (IEEE1394) is input, the EE sound of the input audio signal is output in the VTR mode.

MEMO

Alarm sound is not output.

0[IEEE1394] IEEE1394 connector (6-pin)

Using an IEEE1394 cable (optional), a digital video com- ponent with IEEE1394 connector can be connected here. X See “Connecting the IEEE1394 Cable” on page 64.

X See “HDV/DV Dubbing” on page 68.

CAUTION

When connecting the IEEE1394 cable, confirm that the connector is facing the right direction before inserting.

X See page 64.

MEMO

Put the covers on the connectors when you are not using them.

16