Scag Power Equipment SW36A-16KAI manual Maintenance, Section, Hours, Procedure, Comments, Break-In

Section 7 R

MAINTENANCE

7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS

		HOURS
								Procedure	Comments
Break-In	8	20	40	100	200	500
(First 10)
X							Check all hardware for tightness
X							Check	all belts for proper	See paragraph 7.6
							alignment
	X						Check engine oil level		See paragraph 7.3
	X						*Clean mower
	X						Check tire pressure		See paragraph 7.8
	X						*Clean air filter element		See paragraph 7.5
	X						Check condition of blades		See paragraph 7.7
	X						Sharpen cutter blades		See paragraph 7.7
	X						Check tire pressure		See paragraph 7.10
	X						Check belt tension		See paragraph 6.3
	X						Check	the operator interlock	See paragraph 4.2
							system
		X					Change engine oil and filter		See paragraph 7.3
			X				Grease spindle bearings
			X				Check belts for proper alignment		See paragraph 7.6
				X			Check	all belts for proper
							alignment
				X			*Replace engine air filter		See engine operator's
									manual
				X			Grease caster wheel bearings		See paragraph 7.2
				X			Grease transmission couplers		See paragraph 7.2
				X			Check all hardware for tightness
				X			Change engine oil		See paragraph 7.3
				X			*Clean air cleaner element		See paragraph 7.5
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions

23