JVC GY-HD250, GY-HD251 manual CAMERA OPERATION Menu Screen, Menu Screens, Memo

e_hd250.book Page 80 Tuesday, October 24, 2006 3:11 PM

MENU SCREENS

CAMERA OPERATION

Menu Screen

The CAMERA OPERATION menu screen is only displayed in the Camera mode.

Item			Function/Setting (bold characters indicate initial settings)
AE LEVEL*1		For adjusting the image level when using auto iris, “ALC” or “EEI”.
		Increase value	: Increases level.
		Decrease value : Decreases level.
		[Settings: –3, –2 - NORMAL (0) - 2, 3]
ALC MAX	Sets the maximum “ALC” value to automatically change the signal intensity level depending on the brightness.
		[Setting: 6 dB, 12 dB, 18 dB]
PRESET TEMP.	Sets the basic color temperature when the [WHT.BAL] white balance selector switch c on page 15 is in the PRST
		(PRESET) position.
		3200K	: Sets the basic color temperature to 3200K. (Use for light sources with a low color temperature,
			such as halogen lamps.)
		5600K	: Sets the basic color temperature to 5600K. (Use for light sources with a high color temperature,
			such as sunlight.)
		MEMO
		This item does not function when the FAW item on the SWITCH MODE menu screen is set to “PRESET”.
SMOOTH TRANS*1		Smoothens the transition when the [GAIN] switch b on page 15, or [WHT.BAL] switch c on page 15 is switched
		over and achieves gradual change in place of sudden change.
		However, the smooth transition function does not function when switching the [GAIN] switch set in ALC, FULL AUTO
		ON.
		OFF	: Deactivates the smooth transition function.
		ON	: Activates the smooth transition function.
BARS*1		Sets whether or not color bars are output. (This is fixed at “OFF” when in FULL AUTO mode)
		OFF	: Color bars are not output.
		ON	: Color bars are output.
PAGE BACK	The TOP MENU returns when the SHUTTER dial is pressed with the cursor at this position.

*1 REMOTE appears as the setting value of this item when the remote control unit is connected.

80