JVC GY-HD251 Display, Status, Action, There are less than 3 minutes remaining on the tape flash

e_hd250.book Page 107 Tuesday, October 24, 2006 3:11 PM

Display	Status	Action
CHANGE PB TAPE	Image format which is different from the one set in the PB	Check the setting for the PB TAPE item.
FORMAT*	TAPE item on the VIDEO FORMAT[2/2] menu screen is be-	X See page 79.
	ing played back.
LOW VOLTAGE*	Battery is low.	Charge the battery pack or replace it.
TAPE NEAR END*	There are less than 3 minutes remaining on the tape (flash-	To continue shooting, find a new tape or replace the tape.
	es only when recording).
TAPE END*	Displayed when the tape ends.	Replace the tape.
CHANGE 1394	Recording or playback video format and the IEEE1394 set-	Set the IEEE1394 switch correctly, turn the power off and
SWITCH*	ting is different when connected to the IEEE1394 port.	then on again.
SWITCH TO VTR	Tried to use the FF or REW button in camera mode.	Press the CAM/VTR button to set VTR mode.
MODE*
HEAD CLEANING	Displayed when the video head is dirty. (Head clogging was	Clean with a special head cleaning tape.
REQUIRED	detected during an edit search in shooting mode as well as	X See page 7.
	during playback and displayed.)
CLEANING TAPE!	Displayed when a head cleaning tape is inserted.	The display disappears when the head cleaning tape is re-
		moved.
COPY GUARD!*	Tried to play back a copyguarded tape.	Cannot play back a copyguarded tape.
FAN MOTOR HOUR	Over the prescribed fan motor usage time.	Please contact your local dealer or JVC.
PUSH CASSETTE	The videocassette cover is not firmly shut.	Lightly push the top center of the videocassette cover.
COVER*
CHANGE THE SYS-	Displayed when you attempt to change FRAME RATE item	When the FRAME RATE item setting is changed, the frame
TEM*	in the VIDEO FORMAT menu screen.	rate system for this device is changed. Check the frame
		rate to use before changing the setting.
		X See pages 54 and 77.

*When status indications are magnified, warnings are not displayed on the LCD monitor. X See “Magnified Status Indications on the LCD Monitor” on page 29.

107