Lenovo E200 manual Miscellaneous error messages

Miscellaneous error messages

Message/Symptom	FRU/Action
Changing display colors	Display/Monitor
Computer will not power-off. See “Power	1.	Power Switch
Supply Problems” on page 53.
	2.	System Board
	3.	Riser card, if installed
Computer will not RPL from server	1.	Ensure that network is in startup
		sequence as first device or first device
		after diskette
	2.	Ensure that network adapter is enabled
		for RPL
	3.	Network adapter (Advise network
		administrator of new MAC address)
Computer will not perform a Wake on LAN®	1.	Check power supply and signal cable
(if applicable)
		connections to network adapter
	2.	Ensure that the operating system settings
		are set to enable Wake on LAN
	3.	Ensure Wake on LAN feature is enabled
		in Setup/Configuration (see “Starting the
		Setup Utility program” on page 49)
	4.	Ensure network administrator is using
		correct MAC address
	5.	Ensure no interrupt or I/O address
		conflicts
	6.	Network adapter (advise network
		administrator of new MAC address)
Dead computer. See “Power Supply	1.	Power Supply
Problems” on page 53.
	2.	System Board
Diskette drive in-use light remains on or	1.	Diskette Drive
does not light when drive is active.
	2.	System Board
	3.	Diskette Drive Cable
Flashing cursor with an otherwise blank	1.	System Board
display.
	2.	Primary Hard Disk Drive
	3.	Hard Disk Drive Cable
Incorrect memory size during POST	1.	Run the Memory tests
	2.	Memory Module
	3.	System Board
″Insert a Diskette″ icon appears with a	1.	System Board
known-good diagnostics diskette in the first
	2.	Diskette Drive Cable
3.5-inch diskette drive.
	3.	Network Adapter
Intensity or color varies from left to right of	1.	Display
characters and color bars
	2.	Video adapter (if present)
	3.	System Board
No power or fan not running	1.	See “Power Supply Problems” on page
		53.

Chapter 7. Symptom-to-FRU Index 77