Lenovo manual Lenovo E200 Hardware Maintenance Manual

Diagnostic Error Code	FRU/Action
001-286-XXX	System board
001-287-XXX
001-288-XXX
System Timer failure
001-292-XXX	1.	Run Setup and re-test
System CMOS
	2.	System board
RAM error
001-293-XXX	1.	CMOS Battery
System CMOS Battery
	2.	System board
001-298-XXX	1.	Flash the system. See “Flash update
System RTC date/time update failure
		procedures” on page 111
	2.	System board
001-299-XXX	System board
System RTC periodic interrupt failure
001-300-XXX	System board
System RTC Alarm failure
001-301-XXX	1.	Flash the system. See “Flash update
System RTC Century byte error
		procedures” on page 111
	2.	System board
005-000-XXX	No action
Video Test Passed
005-00X-XXX	1.	Video card, if installed
Video error
	2.	System board
005-010-XXX	1.	Video card, if installed
005-011-XXX
	2.	System board
005-012-XXX
005-013-XXX
Video Signal failure
005-016-XXX	1.	Video Ram
Video Simple Pattern
	2.	Video card, if installed
test failure
	3.	System board
005-024-XXX	1.	Video card, if installed
Video Addressing test failure
	2.	System board
005-025-XXX	1.	Video card, if installed
Video Checksum Value error
	2.	System board
005-027-XXX	1.	Run Setup
Video Configuration/Setup error
	2.	Video drivers update
	3. Video card, if installed
	4.	System board
005-031-XXX	1.	Video cable
Video Device Cable failure
	2.	Monitor
	3. Video card, if installed
	4.	System board
005-032-XXX	1.	Video card, if installed
Video Device Controller failure
	2.	System board

58Lenovo E200 Hardware Maintenance Manual