Lenovo E200 manual Removing and replacing the front bezel

Removing and replacing the front bezel

The front bezel must be removed to replace some FRUs.

1.Remove the computer cover. See “Removing the computer cover” on page 86.

2.Remove the front bezel by releasing the three plastic tabs inside the chassis and push the bezel outward as shown.

3.To reinstall the bezel, align the plastic tabs on the bottom of the bezel with the corresponding holes in the chassis, and then snap it into position at the bottom and top of the chassis.

4.Go to “Completing the FRU replacement” on page 107.

88Lenovo E200 Hardware Maintenance Manual