Lenovo E200 manual Diagnostic error codes

Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See “Running tests” on page 44 for the specific type for information about the Diagnostic programs.

In the following index, X can represent any number.

Diagnostic Error Code	FRU/Action
000-000-XXX	No action
BIOS Test Passed
000-002-XXX	1.	Flash the system. See “Flash update
BIOS Timeout
		procedures” on page 111
	2.	System board
000-024-XXX	1.	Flash the system. See “Flash update
BIOS Addressing test failure
		procedures” on page 111
	2.	System board
000-025-XXX	1.	Flash the system. See “Flash update
BIOS Checksum Value error
		procedures” on page 111
	2.	System board
000-026-XXX	1.	Flash the system. See “Flash update
FLASH data error
		procedures” on page 111
	2.	System board
000-027-XXX	1.	Run Setup
BIOS Configuration/Setup error
	2.	Flash the system. See “Flash update
		procedures” on page 111
	3.	System board
000-034-XXX	1.	Reboot the system
BIOS Buffer Allocation failure
	2.	Flash the system. See “Flash update
		procedures” on page 111
	3.	Run memory test
	4.	System board
000-035-XXX	1.	Flash the system. See “Flash update
BIOS Reset Condition detected
		procedures” on page 111
	2.	System board
000-036-XXX	1.	Flash the system. See “Flash update
BIOS Register error
		procedures” on page 111
	2.	System board
000-038-XXX	1.	Flash the system. See “Flash update
BIOS Extension failure
		procedures” on page 111
	2.	Adapter card
	3.	System board
000-039-XXX	1.	Flash the system. See “Flash update
BIOS DMI data error
		procedures” on page 111
	2.	System board
000-195-XXX	Information only
BIOS Test aborted by user	Re-start the test, if necessary

54Lenovo E200 Hardware Maintenance Manual