Miele G2142 operating instructions Frequently asked questions, Technical faults

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.

￿Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

Issue	Possible fault	Solution
The Start / Stop	The machine is not	Insert the plug.
indicator does not flash	plugged in.
after the dishwasher is	The fuse has tripped.	Reset the circuit breaker.
turned on with "￿".
		See data plate for
		minimum amperage.
The dishwasher stops	The fuse has tripped.	Reset the circuit breaker.
during a program.		See data plate for
		minimum amperage.
The program cycle	There may be a technical	–	Turn the dishwasher off
indicators "Rinse",	fault.		"￿".
"Drying" and "End"		After a few seconds:
flash at the same time.		–	Turn the dishwasher on
			"￿".
		–	Select the desired
			program with the
			"Program" button.
		–	Press the "Start / Stop"
			button.
		If the problem persists,
		contact Technical
		Service.
The drain pump is	The waterproof system	– Turn off the water
running when the door	has activated.		supply.
is open.		–	Contact Miele
			Technical Service.

30