Frequently asked questions
Issue | Possible fault | Solution | |
|
|
| |
Dishes are still wet, | The rinse aid setting may | Increase the dosage, refill | |
glasses and cutlery are | be too low, or the rinse | the reservoir or switch the | |
spotted. | aid reservoir is empty. | rinse aid product when | |
|
| refilling, see "Before using | |
|
| for the first time". | |
|
|
| |
| Dishes were taken out too | Leave dishes in longer, | |
| soon. | see "Use". | |
|
|
| |
| A "Tab" product was | Use a normal (powder or | |
| used. These products | gel) detergent and add | |
| have a low drying effect. | rinse aid. | |
|
|
| |
White residue is visible | Not enough rinse aid was | Increase the dosage, see | |
on cutlery and dishes. | used. | "Before using for the first | |
Clouding occurs on |
| time". | |
glassware and film can |
|
| |
A "Tab" product was | Use a normal (gel or | ||
be wiped off. | |||
used. | powder) detergent. | ||
| |||
|
|
| |
| The salt container is | Refill the salt container, | |
| empty. | see "Before using for the | |
|
| first time". | |
|
|
| |
| The salt container lid was | Reseat it making sure it | |
| not correctly screwed on. | screws back on correctly. | |
|
|
|
35
