Frequently asked questions
Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.
Technical faults
Problem | Possible fault | Solution | ||
The Start / Stop | The machine is not | Insert the plug. | ||
indicator does not flash | plugged in. |
|
| |
after the dishwasher is | The fuse has tripped. | Reset the circuit breaker. | ||
turned on with "". | ||||
| See data plate for | |||
|
| |||
|
| minimum amperage. | ||
The dishwasher stops | The fuse has tripped. | Reset the circuit breaker. | ||
during a program. |
| See data plate for | ||
|
| minimum amperage. | ||
The program cycle | There may be a technical | – | Turn the dishwasher off | |
indicators "Cleaning", | fault. |
| "". | |
"Drying" and "End" |
| After a few seconds: | ||
flash at the same time. |
| – | Turn the dishwasher on | |
|
| |||
|
|
| "". | |
|
| – | Select the desired | |
|
|
| program with the | |
|
|
| "Program" button. | |
|
| – | Press the "Start / Stop" | |
|
|
| button. | |
|
| If the problem persists, | ||
|
| contact Technical Ser- | ||
|
| vice. | ||
The drain pump is | The waterproof system | – Turn off the water | ||
running when the door | has activated. |
| supply. | |
is open. |
| – | Contact Miele | |
|
|
| Technical Service. | |
33
