Before using for the first time
13 - 70 gr/gal:
^Press the f button. The f indicator will light.
An indicator corresponding to a set water hardness will light (see Table 2).
Table 2:
gr/gal | ppm | Button | ||
13 |
|
| 230 | a |
14 - 16 | 250 | - | 290 | b |
17 - 22 | 310 | - | 400 | c |
23 - 35 | 410 | - | 630 | d |
36 - 70 | 650 | - 1260 | e | |
If this value corresponds with the water hardness in your area:
^Turn off the dishwasher.
If you need to program a different water hardness:
^Press the button which corresponds to your water hardness (see Table 2).
The "Salt" and b indicators will flash.
^Press the f button twice.
The "Salt" and f indicators will flash.
The new water hardness is set.
^Turn off the dishwasher.
Checking the programmed water hardness
^Open the door.
^Turn off the dishwasher.
^Press and hold the a and c buttons. At the same time turn on the dish- washer with the "On" (15) button.
^Release all buttons.
The "Salt" and b indicators will flash. If this is not the case, the above steps must be repeated.
^Press the b button.
The programmed water hardness is in- dicated by:
1 - 12 gr/gal
Corresponding indicator is lit, (see Table 1).
^If an indicator is not lit, press the f button.
13 - 70 gr/gal:
The f indicator and an additional corresponding indicator is lit, (see Table 2).
^Turn off the dishwasher.
16
