Additional options
Buzzer
A signal sounds at the end of a program and when a fault occurs.
The buzzer at the end of a program sounds five times in quick succession for up to one hour.
The buzzer for a fault sounds in intervals up to two minutes.
The buzzer is activated by default. It can be turned off, so it does not sound at the end of a program. The buzzer for a fault cannot be turned off.
Open the door.
Turn the dishwasher off with "".
Press the "Program" button and at the same time turn the dishwasher on with "".
Hold the program button until the lower right program indicator comes on.
If it does not come on, start over.
Press the "Options" button four times.
The "Tab" indicator flashes four times in intervals.
The time display shows if the program end buzzer is turned on or off.
–"p 1": Buzzer is turned on
–"p 0": Buzzer is turned off
Press the "Program" button to change the setting.
The setting is saved.
Turn the dishwasher off with "".
Default settings
All settings can be reset to the factory default.
Open the door.
Turn the dishwasher off "".
Press and hold the "Program" button and at the same time turn the dishwasher on "". Hold the "Program" button until the lower right program indicator comes on.
If it does not come on, start over.
Press the "Options" button 12 times.
The "Tab" indicator flashes once long and twice short in intervals.
The time display shows if a setting was changed.
–"p 1": All settings are factory default.
–"p 0": At least one setting was changed.
To reset the dishwasher to the factory default, press the "Program" button.
The setting is saved.
Turn the dishwasher off "".
33
