Miele G 1262 Problem Possible fault Solution Glasses are, Etching on, Glasses are dull, Removed

	Frequently asked questions
Problem	Possible fault	Solution
Glasses are	Detergent deposits.	Use a different detergent.
discolored and
the film cannot
be wiped off.
Clouding or	Possible causes may be :	See the relevant section of
etching on	excessive rinse aid, incorrect	this manual to:
glasses.	water hardness level set, type	– adjust the rinse aid
	and amount of detergent.		dosage,
	Any one or a combination of	–	adjust the water
	these faults may be to blame.
			hardness level,
		–	change the type and/or
			adjust the amount of
			detergent used,
		–	connect the dishwasher
			to a cold water supply.
Glasses are dull	Glasses are not dishwasher safe.	There is no remedy. Only
and discolored,		wash dishwasher safe
film cannot be		glasses in the dishwasher.
wiped off.
Tea or lipstick	The wash temperature of the	Select a program with a
stains have not	selected program was too low.	higher temperature.
been completely	The detergent has a low	Use a different detergent.
removed.
	bleaching effect.
Plastics are	Natural dyes e.g. from	Use more detergent, see
discolored.	vegetables may be the cause.	"Adding detergent".
	Not enough detergent was used	Discoloration is
	to break down natural dyes.	permanent.
There are rust	The affected items are not	There is no remedy. Only
stains on cutlery.	corrosion resistant.	wash dishwasher safe
		cutlery in the dishwasher.
	A program was not run after	Start the "Express"
	refilling salt (depending on	program (empty and
	model). Salt residuals got into the	without the Turbo function)
	wash cycle.	after refilling the salt.
	The salt container lid was not	Reseat and screw the lid
	screwed on properly (depending	on firmly.
	on model).

41