Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.
Technical faults
Issue | Possible fault | Solution |
The Start/Stop indicator | The machine is not | Insert the plug. |
does not flash after the | plugged in. |
|
dishwasher is turned on | The fuse has tripped. | Reset the circuit breaker. |
with s. |
| Make sure it is a 15 A |
|
| breaker. |
The dishwasher stops | The fuse has tripped. | Reset the circuit breaker. |
during a program. |
| Make sure it is a 15 A |
|
| breaker. |
The program cycle | There may be a technical | – Turn the dishwasher off |
indicators "Rinse", | fault. | s. |
"Drying" and "End" |
| After a few seconds: |
flash at the same time. |
| – Turn the dishwasher |
|
| |
|
| on. |
|
| – Select the desired |
|
| program with the |
|
| program selector |
|
| button. |
|
| – Press the "Start/Stop" |
|
| button. |
|
| If the problem persists, |
|
| call Technical Service. |
The drain pump is | The waterproof system | – Turn off the water |
running when the door | has activated. | supply. |
is open. |
| – Call Miele Technical |
|
| Service. |
29
