Plumbing

Waterproof system

All Miele dishwashers have a safety valve located on the incoming water line and a sealed underside with a water sensor. If a fault occurs, the water intake is stopped and the drain pump is activated.

Connection to the water supply

￿Do not drink water from the dishwasher!

The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot or cold water source. For lowest energy consumption connect the dishwasher to a cold water source. For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles.

The inlet hose is approximately 5 ft. (1.5m) long.

A 5 ft. (1.5m) drain extension is available from Miele.

The water inlet hose comes equipped with a 3/4" female hose thread connector. This can be directly connected to a water supply with 3/4" MHT (male hose thread ends).

Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar).

￿To prevent damage to the dishwasher, it must only be connected to a fully vented drainage system.

￿Do not cut the intake hose. It contains electrical wiring. If the hose is cut, the dishwasher will not work. There will be a water leak and you could be injured. If the hose is too long, coil it neatly and place it behind the machine.

54

Page 54
Image 54
Miele G 2141 manual Plumbing, Waterproof system, Connection to the water supply

G 2141 specifications

The Miele G 2141 is a high-performance dishwasher that exemplifies the brand's commitment to quality and innovation. This model is designed to offer exceptional cleaning capabilities while maintaining energy efficiency and user convenience.

One of the standout features of the Miele G 2141 is its impressive array of wash programs. With six different options, including the eco-friendly "Gentle" and "Intensive" cycles, users can choose the best program for their specific needs. The "Automatic" mode is particularly noteworthy as it optimizes water and energy consumption based on the degree of soiling detected by the machine, ensuring effective cleaning while reducing waste.

The dishwasher employs Miele's renowned Water Protection System, which enhances safety and prevents leaks. This feature provides peace of mind, making it ideal for households that prioritize reliability. The G 2141 also boasts an innovative basket design with adjustable elements, allowing users to customize the interior layout to accommodate various dishware sizes and shapes, from delicate glassware to large pots and pans.

Another significant aspect of the G 2141 is its energy efficiency. It falls under the A++ energy rating category, meaning it uses minimal energy while performing at a high standard. This not only contributes to lower utility bills but also highlights Miele's commitment to environmental sustainability. The machine's quiet operation, at just 46 dB, allows it to run discreetly, making it perfect for open-plan living spaces or nighttime operation without disturbing the household.

The Miele G 2141 also features a user-friendly control panel with intuitive buttons and a clear display, making cycle selection simple and efficient. Its delay-start function allows users to set the machine to begin a wash cycle at a later time, adding to the convenience.

In terms of design, the G 2141 has a sleek, modern appearance that fits seamlessly into any kitchen decor. The stainless-steel finish not only looks smart but is also easy to clean, maintaining its stylish appeal over time.

In summary, the Miele G 2141 dishwasher is a perfect blend of advanced technology, energy efficiency, and intuitive design. With its variety of wash programs, innovative features, and reliable performance, it stands as a worthy investment for those seeking a high-quality, durable appliance that aligns with modern living standards.