Plumbing

Drainage

–The machine comes equipped with a built-in non-return valve on the discharge side to prevent waste water from flowing back into the dishwasher.

–The dishwasher is equipped with a

5 ft (1.5 m) flexible drain hose with an internal diameter of 7/8" (22 mm).

–Drain hose extensions and adapters can be ordered from Miele.

The maximum drain hose length is 13 ft. (4 m), max. drain height: 39" (1 m).

–If the hose is to be directly fitted to the drainage outlet on site, use the supplied hose clip (see assembly plan).

–The hose can be installed to the left or right side.

–The existing drain pipe for the drain hose is designed for various hose diameters. The drain pipe must be shortened if the drain pipe extends too far into the drain hose. The drain hose could get clogged.

–The drain hose must not be shortened.

￿Make sure the hose is installed without kinking, pressure or being pulled.

Venting the drainage system

If the dishwasher drain hose is connected to a floor drain or to a drain pipe that is less than 8" (20 cm) above the floor, the drain must be vented. Otherwise the water inside the dishwasher may siphon out during the wash program.

￿Open the dishwasher door and remove the lower basket.

￿Pull the lower spray arm firmly upwards to remove.

￿Cut off the vent cap located at the right rear of the triple filter system, as illustrated.

55

Page 54 Page 56
Page 55
Image 55
Miele G 2141 manual Drainage, Venting the drainage system
Page 54 Page 56

G 2141 specifications

The Miele G 2141 is a high-performance dishwasher that exemplifies the brand's commitment to quality and innovation. This model is designed to offer exceptional cleaning capabilities while maintaining energy efficiency and user convenience.

One of the standout features of the Miele G 2141 is its impressive array of wash programs. With six different options, including the eco-friendly "Gentle" and "Intensive" cycles, users can choose the best program for their specific needs. The "Automatic" mode is particularly noteworthy as it optimizes water and energy consumption based on the degree of soiling detected by the machine, ensuring effective cleaning while reducing waste.

The dishwasher employs Miele's renowned Water Protection System, which enhances safety and prevents leaks. This feature provides peace of mind, making it ideal for households that prioritize reliability. The G 2141 also boasts an innovative basket design with adjustable elements, allowing users to customize the interior layout to accommodate various dishware sizes and shapes, from delicate glassware to large pots and pans.

Another significant aspect of the G 2141 is its energy efficiency. It falls under the A++ energy rating category, meaning it uses minimal energy while performing at a high standard. This not only contributes to lower utility bills but also highlights Miele's commitment to environmental sustainability. The machine's quiet operation, at just 46 dB, allows it to run discreetly, making it perfect for open-plan living spaces or nighttime operation without disturbing the household.

The Miele G 2141 also features a user-friendly control panel with intuitive buttons and a clear display, making cycle selection simple and efficient. Its delay-start function allows users to set the machine to begin a wash cycle at a later time, adding to the convenience.

In terms of design, the G 2141 has a sleek, modern appearance that fits seamlessly into any kitchen decor. The stainless-steel finish not only looks smart but is also easy to clean, maintaining its stylish appeal over time.

In summary, the Miele G 2141 dishwasher is a perfect blend of advanced technology, energy efficiency, and intuitive design. With its variety of wash programs, innovative features, and reliable performance, it stands as a worthy investment for those seeking a high-quality, durable appliance that aligns with modern living standards.
Top Page Image Contents